Computer (Non-Linear Editing/File Transfer); Hard Disk Drive (Data Copying) - Panasonic AG-HVX202AEN Operating Instructions Manual

Computer (non-linear editing/file transfer)

File transfer/nonlinear editing
USB cable (optional)
Computer
•• For a Windows computer
1394 cable (optional)
•• For an Apple Macintosh computer
•• For details on the computer’' s conditions and other factors, see page 82.
1394AVC transfer/nonlinear editing
Computer (Windows/Apple Macintosh)
1394 cable (optional)
•• When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera.
(Page 66)
•• No guarantees are given for images and audio signals which are output simultaneously from the camera-
recorder while data is being transferred from a computer to the camera-recorder.
•• As considerations have been made for compatibility with the AG-HVX200, the series name of the unit,
“"AG-HVX202”", will appear on the computer screen.
When connecting the unit to an Apple Macintosh computer
•• Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit
may not be mounted.
•• The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation
state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it.
If the unit is not mounted properly on an Apple Macintosh computer
•• When the P2 card access lamp flashes orange
1. Select [Applications]
2. Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click “"Mount.”"
•• When the P2 card access lamp is off
Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then
re-connect it.

Hard disk drive (data copying)

Hard disk drive
1394 cable (optional)
Mini-B type
USB 2.0
4-pin type
1394
4-pin type
1394
[Utilities] and start up [Disc Utility].
4-pin type
1394
(Continued on the next page)
77