To answer a ringing call at a specific
extension in any pickup group:
ß
or
Meridian Display Option
The 2 line by 24 character display makes the most sophisticated features on your
Meridian Digital Telephone easy to use. Screen prompts take you step by step through
procedures and keep you informed on the status of various features such as Call
Forward and Make Set Busy. Your display can be tilted forward or back to an angle
that allows you to see it best.
Whether your display is factory installed or added on later, your top right function key
will be designated as a
mode, where you can make adjustments to various settings such as volume and
display contrast. When you press the
mode, you lock the settings until you reenter programming mode
This section shows you how to use your
explanations, refer to you Meridian Digital Telephone user guide.
Programming
When you first press
This is the first programming selection.
You can press
®
make a selection, dial the number shown on the screen. Make the changes and press
P
a second time to save them and exit programming mode.
Note: After any programming procedure press
setting.
3.
1.
2. Press
3.
P
key. This key enters you into the programming
P
P
to enter programming mode, you will see this screen.
00 VOLUME ADJUSTMENT
SELECT OR SCROLL < < < > > >
to scroll forward or back through the available selections. To
Dial
the pickup group number of the ring-
ing telephone.
Lift the handset
DN Pickup,
the
of the ringing telephone.
Dial
DN
key again to exit programming
P
key. For complete feature
P
Meridian Display Option
DN
or press a
Key.
SPRE +
or dial
to exit and save the new
.
·fi
10