Table of Contents
Advertisement
Setting Up Message Forwarding
Clicking the Message Forwarding Rule link loads the Message Forwarding Rule
page. This page provides the interface to:
Create a rule
Delete an existing rule
Edit an existing rule
Enable or disable a rule
A rule must be enabled to be active. A new rule is enabled by default. A maximum of
one rule per CallPilot mailbox is supported.
Clicking the Configure Rule button loads the Message Forwarding Rule Configuration
page. This page provides the interface to:
Determine which messages are forwarded
Enter a single e-mail address or CallPilot address where the message is to be
forwarded
Specify when to mark the original message as Read
Determine if the voice portion of the message is to be converted to WAV
42
Advertisement
Table of Contents
