Selecting A Source; Selecting The Computer Or Video Source - NEC NP2000 User Manual

Selecting a Source

Selecting the computer or video source

Selecting from Source List
Press and quickly release the SOURCE button on the projector cabinet to display
the Source list. Each time the SOURCE button is pressed, the input source will
change as follows: "Computer 1/2/3", "Component", "Video" (VCR or laser disc
player), "S-Video", "Viewer" (slides on a PC card) or "LAN" (LAN port [RJ-45] or
wireless LAN card).
To display the selected source, press the ENTER button.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 1 second, the projector will
search for the next available input source. Each time you press and hold the
SOURCE button for a minimum of 1 second, the input source will change as
follows:
Computer1 → Computer2 → Computer3 → Component → Video → S-Video →
Viewer → Computer1 → ...
If no input signal is present, the input will be skipped. When the input source you
wish to project is displayed, release the button.
Using the Remote Control
Press any one of the COMPUTER 1/2/3, COMPONENT, VIDEO, S-VIDEO,
VIEWER or LAN buttons.
3. Projecting an Image (Basic Operation)
26
SELECT
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
SELECT
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
POWER POWER
OFF ON
COMPUTER
1 2
VIEWER
VIDEO
COMPONENT
3
S-VIDEO LAN
SELECT