NEC NP1000 Installation Manual

Desktop and ceiling mount
Hide thumbs Also See for NP1000:

Advertisement

Quick Links

NP1000/2000 Installation Guide
Desktop and Ceiling Mount
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Formulas _________________________________
Diagrams & Distance Charts;
Lens Shift Adjustable Range
Cabinet Dimensions_____________
Lens Dimensions_______________
Ceiling Mount Dimensions________
Ceiling Mount Dimensions________
Input Panel and Control Codes
Product Description
Type:
3 panel LCD projector,
0.8 p-Si TFT w/MLA
Resolution:
1024 x 768 (4:3) / 1024 x 576 (16:9)
Network Ready, integrated wired/optional wireless
Lens Specifications
NP01FL:
Throw Ratio: ~ 0.8:1
Screen Sizes: 40"-150"
NP02FL:
Throw Ratio: ~1.18 - 1.54:1 Focal Length: 19.42 - 25.26mm NP04FL:
Screen Sizes: 30" - 500"
Standard: Throw Ratio:~1.5 - 2.0:1
Screen Sizes: 30" – 500 "
Screen/Aspect Ratio
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug in the image width for "W" in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3:
Projection Formulas:
NP01FL:
C = 0.8325W – 1.33
NP02ZL:
C(Wide) = 1.2220W – 1.798 --------- C(Tele) = 1.5894W – 1.795
Standard:
C(Wide) = 1.5455W – 2.022 --------- C(Tele) = 2.0555W – 2.015
NP03ZL:
C(Wide) = 2.0069W – 2.830 --------- C(Tele) = 3.1710W – 2.840
NP04ZL:
C(Wide) = 3.0537W – 4.830 --------- C(Tele) = 4.8860W – 4.850
NP05ZL:
C(Wide) = 4.8275W – 7.625 --------- C(Tele) = 7.3379W – 7.645
Note: Tilting the front of the projector from level up or down by
more than 45° could reduce lamp life up to 20%.
www.necvisualsystems.com
4:3
_______
16:9___
_______
________
_______
_______
_______
______
Focal Length: 13.2mm
F/#:2.3
F/#:2.2
_________
Focal Length:24.4 - 32.5mm
F/#:1.7
Pg 1
__
Pg 2
Pg 3
__
Pg 4
Pg 5
Pg 6
Pg 7
Pg 8
Pg 9
Dimensions: 15.7"(W) x 5.9"(H) x 14.1"(D)
Weight:
16.1 lbs
Brightness:
NP1000 – 3500 ANSI Lumens
NP2000 – 4000 ANSI Lumens
Manual: Lens Shift, Horizontal & Vertical /Zoom/ Focus
NP03FL:
Throw Ratio:~1.94 - 3.07:1
Screen Sizes: 40" - 500"
Throw Ratio:2.98 -4.77:1
Screen Sizes: 60" - 500"
NP05FL:
Throw Ratio:4.62 - 7.02:1
Screen Sizes: 80" - 500"
NEC Solutions (America), Inc.
Visual Systems Division
Focal Length:31.6 – 50.2mm
F/#:2.2
_____________
Focal Length:48.8 - 77.6mm
F/#:2.2____ _________ _
Focal Length:76.6 - 116.5mm
F/#:2.2
Definitions:
W = Image Width
H = Image Height (size)
C = Throw distance
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Diagonal = W x 5/4
16:9 Screen Formulas:
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16
NP1000/2000
v 1.3
Page 1 of 9

Advertisement

Table of Contents
loading

Summary of Contents for NEC NP1000

  • Page 1 Screen/Aspect Ratio Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
  • Page 2: Ceiling Mount Installation

    Desktop and Ceiling Mount Projection Distance and Screen Size for Ceiling Mount The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distances are in inches. For millimeters multiply by 25.4.
  • Page 3: Projection Distance And Screen Size For Ceiling Mount

    Desktop and Ceiling Mount Projection Distance and Screen Size for Ceiling Mount The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distances are in inches. For millimeters multiply by 25.4.
  • Page 4: Lens Shift Adjustable Range

    NP1000/2000 Installation Guide Desktop and Ceiling Mount Lens Shift Adjustable Range Desktop/Front Vertical Normal Position Ceiling/Front Vertical Normal Position 0.10W 0.50H Normal projection position www.necvisualsystems.com Horizontal 0.5H Normal Position Lens Shift Range for Desktop and Ceiling Mount Application The diagram below shows the location of the image position in the lens.
  • Page 5: Air Filters

    NP1000/2000 Installation Guide Desktop and Ceiling Mount Cabinet Dimensions The following diagrams show the cabinet dimensions for the NP1000/2000. Dimensions are in inches. For millimeters multiply by 25.4. 15.7 Lens Shift Control 15.7 .157 Air Filters www.necvisualsystems.com 4.59 Lamp cover NEC Solutions (America), Inc.
  • Page 6 NP1000/2000 Installation Guide Desktop and Ceiling Mount Lens Dimensions The following drawings show the added dimensions for the optional lenses Dimensions are in inches. For millimeters multiply by 25.4. NP w Standard Lens www.necvisualsystems.com NP02ZL 3.81 NP04ZL 3.25 NEC Solutions (America), Inc.
  • Page 7 NP1000/2000 Installation Guide Desktop and Ceiling Mount Optional Ceiling Mount Dimensions (Model #: NP1000CM) The following diagrams show ceiling mount dimensions for the NP1000/2000. Dimensions are in inches. For millimeters multiply by 25.4. 10.41 12.11 5.88 Pole Ceiling Mount with Input Cover www.necvisualsystems.com...
  • Page 8 NP1000/2000 Installation Guide Desktop and Ceiling Mount Optional Ceiling Mount Dimensions (Model #: NP1000CM) (continued) The following diagrams show ceiling mount dimensions for the NP1000/2000. Dimensions are in inches. For millimeters multiply by 25.4. 12.11 POLE MOUNT W/O I/O COVER www.necvisualsystems.com...
  • Page 9: Pc Control Codes

    Communications: Full duplex PC Control Connector (D-Sub 9P) NOTE: Pins 1, 4, 6, and 9 are used inside the projector. Jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. www.necvisualsystems.com NEC Solutions (America), Inc.

This manual is also suitable for:

Np2000

Table of Contents