NEC NP2000 User Manual page 958

4. Attaching Wireless LAN Card
■ Removing card from PC card slot
1
Press POWER
press the "O (off)" side of the main power switch of the projector.
2
Slowly press the PC card eject button.
The PC card eject button will slightly come forward.
3
Slowly press the PC card eject button once again.
The inserted card will slightly come forward.
4
Slowly pull out the card.
Reference
PC Card Lock
The supplied PC card lock prevents an optional wireless LAN card from being ejected
during use.
The screw for the PC card lock is mounted under the PC card slot on the rear side of the
projector. To attach the PC card lock to the projector, first remove the screw and use it.
12
ON/STAND BY
button to set the projector to Stand-by mode,
Wireless LAN card
PC card lock