Installing Base Stations And Dect Manager - Procedure - Gigaset N720 DECT IP Installation, Configuration & Operation

Firmware updates
Whenever there are new or improved functions for your Gigaset, firmware updates are
made available for you to download to your DECT Manager and your base station
£
( page 97). If this results in operational changes when using your phone, a new
version of this user guide or the necessary amendments will be published on the
Internet at
www.gigaset.com/pro
Select the product to open the relevant product page for your base, where you will
find a link to the user guides.
To find out which version of the DECT Manager firmware is currently loaded,
£
see page 97
Installing base stations and DECT Manager – procedure
Caution
Read the "Gigaset N720 DECT IP Multicell System - Site Planning and Measurement
Guide" before you start installing the devices.
¤
When installing the base stations, please take into account the technical conditions for
positioning and the installation guidelines, which are described in the "Gigaset N720
DECT IP Multicell System -Site Planning and Measurement Guide".
¤
Install the base stations at the positions you determined when planning or measuring
your DECT wireless network.
¤
The Gigaset N720 DM PRO (DECT Manager) can be installed anywhere within the
range of the local network. It does not need to be installed in the coverage area of the
DECT wireless network.
¤
The Gigaset N720 IP PRO base stations and the Gigaset N720 DM PRO DECT Manager
are intended for wall mounting (
Caution
u
The devices are designed for use in dry rooms with a temperature range of +5°C to
+45°C.
u
Never expose the devices to heat sources, direct sunlight or other electrical
appliances.
u
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
and page 103.
£
page 16).
First steps
11