Configuring The System On The Dect Manager; Using The Web Configurator - Gigaset N720 DECT IP Installation, Configuration & Operation

Configuring the system on the DECT Manager

Configuring the system on the DECT Manager
Use the Web configurator to set up your Gigaset N720 DECT IP Multicell System and
configure your DECT network.
u
Set up the DECT
u
Make basic settings for the VoIP connections and register and configure the handsets
you wish to use in the DECT network.
u
You can make additional settings, e.g., meet particular prerequisites for connecting
the handsets to a corporate network or adjust the voice quality on VoIP connections.
u
Use the DECT Manager to save data required to access specific services on the Internet.
These services include access to public online directories and to the incoming eMail
server for eMail accounts, as well as synchronising the date/time with a time server.
u
You can save your DECT Manager's configuration data as files on your PC and reload
these onto your DECT Manager in the event of an error. You can arrange firmware
updates for the DECT Manager.
u
Manage the directories on registered Gigaset handsets (save to PC, compare them
with one another or against a directory on your PC).

Using the Web configurator

Connecting the PC to the Web configurator on the DECT
Manager
Prerequisites:
u
A standard Web browser is installed on the PC, e.g., Internet Explorer version 8.0 or
higher, or Firefox version 4.x or higher.
u
The DECT Manager and PC are directly connected to one another in a local network.
The settings of any existing firewall installed on your PC allow the PC and DECT
Manager to communicate with each other.
Please note
u
Depending on your VoIP PABX/VoIP provider, it is possible that you will be unable
to change individual settings in the Web configurator.
u
While you are connected to the Web configurator, it is blocked to other users.
Simultaneous access is not possible.
¤
Launch the Web browser on your PC.
¤
Enter www.gigaset-config.com in the address field of the Web browser.
The known devices with this name are displayed.
If several devices are found, select your DECT Manager using the MAC address.
A connection is established to the Web configurator for the DECT Manager.
58
network, register and synchronise the base stations.