Ntdw65 Voice Gateway Media Card Leds - Nortel 1000E Maintenance Manual

•

NTDW65 Voice Gateway Media Card LEDs

The Voice Gateway Media Card faceplate provides a four character
LED display that indicates normal or abnormal situations during system
initialization and regular operation of the media card.
Voice Gateway Media Card LED display during system
initialization
During system initialization, diagnostic information from sanity tests appears
on the MC32S media card faceplate. The following table summarizes this
information.
Table 7
Media card LED messages during system initialization
Message
BOOT
POST
PASS
FAIL
LOAD
In a successful initialization, the preceding diagnostic messages appear in
the following order: BOOT, POST, PASS, LOAD.
If a fatal error occurs during the self-test, FAIL appears on the LED display.
PASS and LOAD messages do not appear.
Voice Gateway Media Card LED display during normal operation
During normal operation the faceplate displays the following informational
and diagnostic messages:
Table 8
Media card LED messages during normal operation
Message
Lxxx
Fxxx
Wxxx
Sxxx
Copyright © 2007, Nortel Networks
.
four-character LED display
Description
The first message displayed when the MC32S media card
becomes active
Power-on self-test, displayed while the MC32S carries out system
hardware tests
Power-on self-test pass
The system detected a serious error during self-test
Application software is loading
Description
L = a leader card and xxx = the number of registered sets
F = a follower card and xxx = the number of registered sets
Error code, where xxx is a numeric value
System link error code, where xxx is a numeric value
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
Circuit card features 43