Using Hospitality Features; Configuring Automatic Wake-Up - Nortel 1120 User Manual

Using Hospitality features

Hospitality features are intended for hotel operations. The following
features are discussed in this section:
• "Configuring Automatic Wake-Up" on page 135
• "Activating Message Registration" on page 137
• "Using Maid Identification" on page 139
• "Displaying Room Status" on page 140

Configuring Automatic Wake-Up

Use the Automatic Wake-Up feature to receive a timed reminder call.
From your IP Phone, you can program the system to automatically place
a call to you at a predetermined time. When you answer the call, recorded
music plays for up to 30 seconds, followed by a prerecorded
announcement or the attendant.
To enter the time for an Automatic Wake-Up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Request
FFC.
3. Dial the Automatic Wake-Up
24-hour time format (hhmm). A tone
sounds to confirm your entered time.
Note: In a 24-hour time format,
7:30 a.m. is entered as 0730;
9:45 p.m. is entered as 2145.
Using Hospitality features
time in a
135