View Terminal Type - Nortel 2210 User Manual

View Terminal Type

The Terminal Type option shows the type of PBX used by the system.
Note: The Terminal Type option is for display purposes only. You cannot edit this
option.
To view the Terminal Type:
Terminal Type
Up
1. Press and hold the
in standby mode.
2. Use the Up and
through the menu and select
Type.
3. Press the Select
key) to select the option. The terminal
type displays.
4. Do one of the following:
• Press the Up
previous menu and set another
option.
• Press the Power Off/End Call
to exit all menus and return to the
standby state.
Note: You can also press the
key from the top-level menu to exit and
return to the active (off-hook) state.
User Option menu
Function key when
Down buttons to scroll
Terminal
button (or the OK
soft key to return to the
Exit soft
soft
key
43