Nap Timer - Sangean DPR-16 Operating Instruction

Nap timer

. Press the NAP button to enter timer setting and rotate the Tuning
Control Rotary to adjust the minute setting during  and 99
minutes with  minute interval.
2. Press the Tuning Control Rotary to finish the setting and the timer
will start to count down, meanwhile the display will show the
remaining minutes with Nap timer symbol
countdown display will become normal display after 0 seconds.
3. Press the NAP button to view the remaining time for an active
timer setting. To cancel the function when countdown is progressing,
rotate the Tuning Control Rotary to adjust the minute to 00:00.
4. Rotate the Tuning Control Rotary while the display shows the
remaining time of countdown to adjust the required timer setting
again.
Note:
the radio will sound for 3 minutes when an active timer finishes its
countdown. Press any button to disable the sounding nap timer.
33
on the display. The