Setting The Clock - Sangean DPR-16 Operating Instruction

Setting the clock

Automatically updating the clock
Your radio can set its clock from DAB or FM radio broadcasts. After
a power failure the radio will then set its clock the next time you
turn on the radio in DAB or FM mode. Alternatively you may specify
that the time is not automatically updated. In this case, the clock
must always be set manually after a power interruption.
. With you radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Rotate the Tuning Control Rotary until "System" is highlighted on
the display. Press the Tuning Control Rotary to enter the system
setting menu.
3. Rotate the Tuning Control Rotary until "Time" is highlighted on
the display. Press the Tuning Control Rotary to enter the time
setup.
4. Rotate the Tuning Control Rotary until "Auto update" is highlighted
on the display. Press the Tuning Control Rotary to enter the
auto-update menu.
5. Rotate the Tuning Control Rotary to choose an update option
from "Update from DAB"; "Update from FM"; "Update from Any"
or "No update" as required. Press the Tuning Control Rotary to
confirm your choice. The radio will then exit to the previous menu
display.
9