Performing acceptance tests
Contents
Acceptance tests
Communication Server 1000M and Meridian 1
This section contains information on the following topics:
Acceptance tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing the module power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing the blower unit and thermal sensor . . . . . . . . . . . . . . . . . . . . .
Testing the sysload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing the system terminal and system monitor . . . . . . . . . . . . . . . . .
Testing the PFTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION
Ensure that the current DEP Lists are installed.
Perform the following acceptance tests after the system loading is completed.
1
"Testing the module power supply" on
2
"Testing the blower unit and thermal sensor" on
3
"Testing the sysload" on
4
"Testing the system terminal and system monitor" on
5
"Testing the PFTU" on
page 336
page 339
page 341
Large System Installation and Commissioning
Page 335 of 456
335
336
337
339
340
341
page 337
page 340