Fiji Card Cabling - Nortel 1000M Installation And Commissioning Manual

Page 228 of 456

FIJI card cabling

NN43021-310 Standard 02.01
Cabling Common Equipment in a Multi Group system
Fiber Network is enabled by the installation of one NTRB33 Fiber Junctor
Interface (FIJI) card in each Core/Net or Network module (see Figure 95 on
page 229). FIJI cards require two slots; they are installed in slots 2 and 3 of
each Network module, or in slots 8 and 9 of each Core/Net module. The LCD
display shows the Network group and shelf. If an error occurs, this window
displays an Alarm code.
Class 1 LED Device
DANGER
The fiber-optic interface product used in the Large
System is considered safe. However, as a precaution do
not view the optical port or the end of fiber-optic cable.
Under certain conditions (such as during cable testing or
under light magnification) the cable or port can expose
the eye beyond the limits of Maximum Permissible
Exposure recommended in some jurisdictions. Do not
remove protective caps or plugs until ready to connect the
cable.
December 2007