Olympus ds-3500 Instructions Manual page 11

Locating a Verbal Comment
2 When playing back a file, press and
hold the 9 or 0 button.
• The recorder stops for 1 second
when it reaches the Verbal
Comment.
• The verbal comment part has a
different color.
a
a Verbal Comment part
Clearing a Verbal Comment
1 When playing a Verbal Comment,
press the ERASE button.
2 Press the + button to select
[ Clear ], then press the OK/MENU
button.
Notes:
• Up to 32 Verbal comments can be
set within a file.
• When a file is locked or set to read-
only, or when the SD card is locked,
Verbal comments cannot be erased.
• When the recorder has been set to
DSS Classic mode, it is not possible
to record Verbal Comments.
Index marks
Index marks can be placed into a file
during recording or playback. Index
marks are used to provide a quick
and easy way to identify important or
significant parts within the file.
Setting an index mark
1 While the recorder is in recording
mode or in playback mode, press the
F3 (INDEX) button.
Locating an index mark
2 While playing back a file, press and
hold the 9 or 0 button.
• The recorder stops for 1 second
when it reaches the index mark.
Clearing an index mark
1 Select a file in which index marks
you want to erase are contained.
2 Press the 9 or 0 button to
select the index mark to erase.
3 While the index number appears
for approximately 2 seconds on the
display, press the ERASE button.
• The index mark is erased.
Notes:
• Up to 32 index marks can be set
within a DS2 file.
• Up to 16 index marks can be set
within MP3 and PCM files.
• When a file is locked or set to read-
only, or when the SD card is locked,
index mark cannot be erased.
• If the recorder has been set to DSS
Classic mode, index marks are
limited to a maximum of 16 for each
file.
How to use the menu
Items in menus are categorized by
tabs, so select a tab first and move to
a desired item to quickly set it. You
can set each menu item as follows.
7 7
1, 4, 6 1, 4,6
2 2
3, 5 3, 5
1 While the recorder is in stop mode,
press the OK/MENU button.
• The menu will appear on the
display.
2 Press the 9 or 0 button to
move to the tab that contains the
item you want to set.
• You can change the menu display
by moving the settings tab cursor.
3 Press the + or − button to move to
the item you want to set.
• Move to the menu item you want
to set.
4 Press the OK/MENU button.
• Move to the setting of the
selected item.
11