Yamaha YMC-700 Service Manual page 32

YMC-700/YMC-500
QQ
3 7 63 1515 0
B: SPEAKER SET
Using the sub-menu, the audio input signal is selected and output.
1: FRONT : SML 0dB
The signal, 90 Hz or lower, is mixed into the
channel specified by LFE/BASS.
Audio input select: ANALOG
2: CENTER : NONE
The CENTER signal is distributed to FRONT
TE
L 13942296513
L/R.
Audio input select: OPTICAL
3: LFE / BASS : FRONT
The LFE/BASS signal is distributed to FRONT
L/R.
Audio input select: OPTICAL
The analog switch settings for each sub-menu are as shown in the table below.
1 FRONT : SML 0dB
2 CENTER : NONE
3 LFE / BASS : FRONT
4 TONE : MAX
5 TONE : MIN
LARGE : This mode is used for a speaker with
high bass reproduction performance (a
large unit). Full bandwidth signals are
www output.
SMALL : This mode is used for a speaker with
low bass reproduction performance (a
small unit). The signals of 90 Hz or less
.
are mixed into the channel specified
by LFE/BASS.
32
http://www.xiaoyu163.com
Example
B: SPEAKER SET
– >
1: FRNT: SML
NOW EXECUTING
VOLUME: 25
AUDIO: ANALOG
VIDEO: – –
FRONT
SMALL
LARGE
LARGE
LARGE
LARGE
x ao u163
y
i
2 9
8
4: TONE : MAX
The audio signal is output with the tone control
"BASS +6 dB, TREBLE +6 dB".
Audio input select: ANALOG
5: TONE : MIN
The audio signal is output with the tone control
Q Q
3 6 7 1 3 1 5
"BASS -6 dB, TREBLE -6 dB".
Audio input select: ANALOG
CENTER SURROUND
LARGE LARGE
NONE LARGE
SMALL SMALL
LARGE LARGE
LARGE LARGE
NONE : This mode is used for no center speaker.
The center content is reduced by -3 dB
and distributed to FRONT L/R.
SWFR : LFE of 5.1 ch signal or LFE/BASS
lower than 90 Hz is output through
co
SUBWOOFER OUT.
.
FRONT : LFE of 5.1 ch signal or LFE/BASS lower
than 90 Hz is distributed to FRONT L/R.
9 4 2 8
0 5 8 2 9 9 4 2 8
SUBWOOFER
SWFR
SWFR
FRONT
SWFR
SWFR
m
9 9
9 9