Denon PMA-495R Operating Instructions Manual page 13

Hide thumbs Also See for PMA-495R:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Remote Control Unit RC-176 supplied with the PMA-495R
q
CD
PLAY
PLAY button
1
STOP
STOP button
2
Reverse Track
8
Search button
Forward Track
9
Search button
RANDOM
Refer to the
operating
REPEAT
instructions of your
DENON CD player
DISC SKIP
PAUSE
PAUSE button
3
• The RC-176 Remote Control Unit can control CD players and cassette decks manufactured by DENON.
• Note that operation may not be possible for some models.
• Buttons are conveniently separated into groups, each group controlling one specific component. The groups are AMP, FUNCTION, CD, DECK
and TUNER etc..
For details on operating other components, refer to the operating instructions for the CD player and/or cassette deck.
CAUTION:
• If the power is turned off with the Remote Control Unit, the set is switched to the power stand-by state. If you are absent for a long
period of time, unplug the power cord.
• Only the MUTE/STANDBY LED
• You may experience erratic operation of the Remote Control Unit if it is operated in fluorescent light and direct sunlight, in particular if this
light strikes the Remote Control Sensor on the Amplifier. However, this is not a malfunction, and if this should happen, simply protect the
sensor against such light.
w
!1
lights when in the power stand-by mode.
q
button
POWER
• When the main unit's POWER switch is set to the
ON/STANDBY position (
495R's power on and off.
• When the power is turned off from the remote control
unit, the main unit's MUTE/STANDBY LED remains lit,
but the input LED turns off, indicating that the PMA-495R
is in the standby mode.
• When the main unit's POWER switch is set to the OFF
position (
) after turning the power off from the
£
remote control unit and then set back to the
ON/STANDBY position (
operating mode.
This button will not function if there is a power
failure, if the power cord is not plugged in, or when
using an audio timer.
w
MUTING button
Pressing this switch will activate the muting condition and
no signals will be output to the speakers.
Other buttons
Other buttons are exclusively for the PMA-495R, and
function in the same way as the corresponding buttons on
the set.
DECK
PLAY
PLAY button
1
PLAY (REV)
PLAY (REV) button
0
STOP
STOP button
2
REW
REWIND button
6
FF
FF button
7
Refer to the operating
REC
4
instructions of your
PAUSE
3
DENON tape deck.
A/B DECK
A/B
SELECT button
TUNER
PRESET buttons
ª
Press this button to move up or down among the preset
station numbers.
ENGLISH
), press this to turn the PMA-
¢
), the PMA-495R is set to the
¢
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents