Attaching Cables - Nortel V.34 Supplement Manual

Using the V.34 Modem Adapter Module in a
Passport 2430 Multiservice Access Switch
This chapter supplements the Installing and Operating the Passport 2430
Multiservice Access Switch. Follow the hardware installation steps in that manual,
then refer to this document for information specific to the V.34 Modem adapter
module.

Attaching Cables

Connect the modem cable to the RJ-11 connector on the installed adapter module.
You install the V.34 Modem adapter module in one of the two rear-panel WAN
adapter module slots (Figure 3-1). See Installing and Operating the Passport 2430
Multiservice Access Switch for the complete installation proecdure.
Figure 3-1.
303127-D Rev 00
Telco
V.34 Modem
To
RJ-11 telephone
receptacle
Passport 2430 V.34 Modem Adapter Module Connector
Chapter 3
1
VLK0024A
3-1