Specifying A Rejection Message; Specifying An E-Mail Request; Step 4: Exceptions - Nortel Personal Agent AS 5300 User Manual

78

Specifying a rejection message

To specify a reject message, perform the following steps.
1
2
3
4
5
6
7
8

Specifying an e-mail request

To specify an email request when you receive an incoming call, select the option
to request an email (PSTN callers will receive a busy tone).
With this option, the system requests that callers send e-mail to the e-mail address
of the user that they called. The phone does not ring.

Step 4: Exceptions

In Step 4: Exceptions of the route wizard, specify exceptions to the conditions that
you specified in Step 2: Conditions. The method for specifying exceptions is
consistent with the method for specifying conditions. For more information about
specifying conditions, see
The following links are available as exceptions:
NN42040-105 Nortel AS 5300 Release 1.0
In the Step 3: Actions window, select the Rejection option.
Click the MESSAGE link to compose a message to display when an
incoming call from an anonymous caller activates the route. The Select
rejection message window appears.
To compose a rejection message, click New. A dialog box opens.
Type the text for your message in the dialog box and click OK. The rejection
message appears in the Select rejection message window.
Select the rejection message to activate it.
Click OK to return to the Route wizard. Your reject reason appears in the
Route details window.
To edit the message, click the Rejection link in the Route details window.
Continue to specify conditions.
OR
Click Next to go to the next step.
"Step 2: Conditions" on page
Standard 01.02
70.
June 2008