Figure 18 Vpn Router 1100 Full-Height 1000Base-T (1000 Gt); Figure 19 Vpn Router 1100 Half-Height 1000Base-T (1000 Gt) - Nortel Contivity VPN Switch 1010 Installation Manual

48 Appendix A Technical specifications
•
•
•
•
The following figures show the full and half-height Ethernet faceplates for the
VPN Router 1100.

Figure 18 VPN Router 1100 full-height 1000BASE-T (1000 GT)

The full-height model is for installation in slot 2; the half-height model is for
installation in slot 3.

Figure 19 VPN Router 1100 half-height 1000BASE-T (1000 GT)

Select cables for this card as follows. Keep in mind that this card is
auto-negotiating and uses the highest possible data rate:
•
•
NN46110-313 02.01
6.05.140 and all subsequent versions
7.00.062
7.05.100 and all subsequent versions (FIPS branch)
7.05.300 and all subsequent versions
For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair
each for transmit and receive operations. The cable must comply with the
EIA 568 wiring specification. Nortel recommends a maximum length of 100
meters for the cable segment.
For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.