Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann Vitoladens 300-C Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
• • •
•
•
• •
•
•
• •
•
• • •
• •
• •
• •
• •
•
•
•
• •
• •
• • •
• •
Commissioning steps
Inspection steps
Maintenance steps
1. Filling the heating system..............................................
2. Checking all connections on the heating water side
for leaks
3. Venting the boiler...........................................................
4. Venting the heating system
5. Draining the heating system (if required).....................
6. Filling the siphon or neutralising system (accessory)
with water........................................................................
7. Checking power supply connection
8. Setting the time and date (if required).......................... 10
9. Changing the language at the control unit................... 11
10. Function sequence and possible faults....................... 11
11. Removing the front panel.............................................. 13
12. Opening the boiler door................................................. 14
13. Cleaning the heating surfaces....................................... 14
14. Closing the boiler door.................................................. 17
15. Cleaning the burner........................................................ 18
16. Replacing the nozzle and checking or adjusting the
ignition electrodes.......................................................... 19
17. Burner installation.......................................................... 20
18. Cleaning and replacing the oil pump filter, if
required .......................................................................... 20
19. Checking gaskets and thermal insulation
components.................................................................... 21
20. Checking electrical connections for tightness
21. Checking the condensate drain and cleaning the
siphon (if installed)......................................................... 23

Commissioning, inspection, maintenance

Page
7
8
9
9
5