Installing The Bluetooth - Toshiba satellite A20 series Maintenance Manual

4.13 Bluetooth
Bluetooth module
Bluetooth coaxial cable

Installing the Bluetooth

To install the Bluetooth, follow the steps below and refer to figure 4-21.
1. Connect the Bluetooth SUMI card to the connector on the Bluetooth module.
2. Connect the Bluetooth SUMI card to PJ4900 on the system board.
3. Place the Bluetooth module.
4. Secure the Bluetooth module with the following screw.
• M2×3 SUPER FLAT screw
5. Connect the Bluetooth coaxial cable (brown) to the Bluetooth module.
Satellite A20 Maintenance Manual (960-444)
Figure4-21 Removing the Bluetooth module
4 Replacement Procedures
M2×3 SUPER FLAT screw
Bluetooth SUMI card
PJ4900
×1
4-41