Toshiba satellite A20 series Maintenance Manual page 230

4.8 Cooling Fan
Installing the Cooling Fan
To install the cooling fan, follow the steps below and refer to figures 4-10.
CAUTION: Before installing the fan cover, vacuum off dust or dirt on the indentation of
the filter attached to the fan cover.
1. Seat the cooling fan.
2. Secure the cooling fan with the following screws.
• M2.5×6
3. Connect the fan cable to PJ9900 on the system board.
4. Place the fan cover and secure it with the following screws.
• M2.5×4
5. Place the fin cover and secure it with the following screws.
• M2.5×6
Satellite A20 Maintenance Manual (960-444)
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
4 Replacement Procedures
×2
×2
×2
4-25