Listening To The Radio - Denon DHT-M330DV Operating Instructions Manual

ENGLISH
11

LISTENING TO THE RADIO

(1) Tuning
1
Example: Tuning in FM/AM stations
1 Select the FUNCTION "TUNER".
Main unit
2 Select "FM" or "AM".
• The selected "FM AUTO", "FM MONO" or "AM" is
displayed.
• When using the remote control, the mode button is used to
select FM AUTO and MONO.
Main unit
3 Adjust the receiving frequency.
• When a station is received, the "TUNED" indication will
light.
Main unit
42
2 2, 3
Remote control unit
Remote control unit
Remote control unit
Set the remote
control selector
switches
Switch1 to DVD
Switch2 to TUNER
NOTE:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
• When one of the Tuning +/– button is pressed, the frequency
changes in steps of 50 kHz in the FM band, 9 kHz in the AM
band.
• If one of the Tuning +/– button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
• To stop the auto tuning function, press the Tuning +/– button
once.
FM Stereo Reception
• When a program being broadcast in "FM AUTO" is received,
the "ST" indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode.
2
2
3
1