Button Mapping On The Handset - Nortel T7406 Installation Manual

Button Mapping on the Handset

When you have completed the steps in
27, then, you can map the feature buttons on your set.
The handsets have six feature buttons. These buttons can be
programmed by your system administrator. You can also program the
buttons from your handset. The following section describes the usual
mapping of the buttons, based on the M7310 telephone button mapping.
The illustration below shows examples of the default button mapping
for the handset.
The following three illustrations show the correlation between the
T7406 handset buttons and the M7310, T7316 and T7316E telephones,
which are standard telephones used for Norstar and Business
Communications Manager systems.
M7310 to T7406
M7310 Telephone
Line 1
Line 2
Call Fwd
Button Mapping on the Handset / 37
Handset Configuration
Last No.
Voice call
Intercom
T7406 Handset
on page
T7406 Installation Guide