3.
Dial a number.
4.
Press ® to end the call.
Answer calls
When your telephone rings while you are on a call, you hear a beep
tone through the receiver, unless DND on Busy has been set to Yes in
the telephone system programming. In this case, only the indicator light
on your handset will indicate that another call is coming in.
To answer a call:
1.
Press the flashing red button.
2.
Press ® to end the call.
Note:When the Options list is active, press the flashing red
button to answer an incoming call.
Hold calls
To retrieve a held call, press the button where the call is on hold. Calls
are automatically placed on hold when you switch from one line to
another.
To hold a call:
1.
Press ≥ while on a call. The line button flashes.
2.
Press the flashing button to retrieve a held call.
3.
Press ® to end the call.
Mute microphone
To mute the microphone while you are on a call, press the Options
button.
To cancel Mute, press the Options button again.
Note: While Mute is active, if you press any button on the face of the
handset, the display will clear, but Mute will remain active. To
turn off Mute, press the Options/Mute button on the side of the
handset.
Make and Answer Calls / 43
T7406 Installation Guide