Assigning The Handset To The Base Station - Nortel T7406 Installation Manual

Assigning the Handset to the Base Station

When you assign the first handset to a base station, you must send the
security code to the base station. For subsequent handsets, you only
need to identify the security code on the handset itself. This is
explained in detail in later sections.
This is the general process for setting up a T7406 handset:
• Identify the handset to a unique Handset ID # (1, 2, or 3)
Note: The handset ID #, which gets assigned to each handset,
matches up to TCM/RJ-11 jack on the back of the base .
station. Ask your system administrator which handset ID
maps to which set DN on the system.
• Change the default password for selecting a handset ID (default:
000000)
• Assign a Security code (S.S. code)
• Send the Security code from the handset to the base station
Note: Sending the security code to the base station is only
performed for the first handsets. For subsequent handsets,
you need only identify the security code on the handset.
• Assign the ring type
• Assign the ringer volume
• Assign the language that appears on the handset display
Handset Configuration / 29
T7406 Installation Guide