Turning The Message Led On Or Off; Setting The Duration Of The Backlight; Setting Key Beeps; Setting The Message Led - Nortel T7406E User Manual

28 Chapter 4 Configuring the handset settings

Setting the message LED

Complete this procedure to have the message LED flash when you receive a voice message, or to
turn off this option.

Turning the message LED on or off

1 In programming mode, scroll to the
Select
2 Press
3 To turn the message LED on, scroll to the On option and press
4
To turn the message LED on, scroll to the Off option and press

Setting the duration of the backlight

Complete this procedure to set the length of time the backlight remains on after you have
completed a call or other action on the handset. The longer duration you select for the backlight,
the less talk time and standby time you have.

Setting the duration of the backlight

1
In programming mode, scroll
Select
2 Press
3 Scroll through the duration options (shown in 10-second increments) to the length of time you
want the backlight to remain on.
Select
4 Press

Setting volume and tones

Complete the following procedures to
• turn key beeps on or off
• set the ring and vibration options
• select a ring type
• select a ring volume
• select a noisy location level

Setting key beeps

1 In programming mode, scroll to the
2 Select
Press
3 Scroll to the
NN40110-110 NN40110-110
.
Back Light
.
.
.
On
option to turn on key beeps.
Message LED
menu.
.
key Beep
menu.
Select .
Select
.