While on an active call
/
Transfer
To go back to the original call if the
transfer is incomplete:
Transfer a call (M3903 and M3904)
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
or
26
3. When you hear the ring or a person
answers, press the
complete the call transfer.
The LED indicator goes from steady on
to off.
If the person you called is not
available, press the
reconnect to the original call.
Note: On the Meridian SL-100, press the
Transfer
Key, dial the number and press
the
Goodbye
Key. If you press the
Key the second time, you get a three way
conference.
1. Press the
Transfer
The other party is on hold and you
receive a dial tone. The screen
displays
2.
Dial
the number of the telephone
where the call is to be transferred.
3. Press the
Swap
talking with the original caller and the
new caller. Press the
complete the transfer.
The two callers are connected and
your telephone is ready to make or
receive new calls.
Transfer
Key to
Line
(DN) Key to
Transfer
Key.
Key to switch between
Connect
Key to
.