Use Speed Call (M3903 And M3904) - Nortel Meridian M3901 User Manual

Use Speed Call (M3903 and M3904)

The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit access code. Contact your network
administrator to determine the capacity of your Speed Call list. This will establish
the number of digits you will enter for each access code.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store or change a Speed Call
number:
To make a Speed Call:
or
1. Press the Speed Call Controller
The screen displays
.
2. Dial a one, two, or three digit code.
Use the Delete
mistake. Use the
the screen without storing a speed call
number.
Note: A dash is automatically inserted
after the required number of digits have
been entered.
3. Dial the associated telephone number.
Use the
Delete
mistake. Use the
the screen without storing a speed call
number.
Note 1: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
4. Press the
Done
and number.
1. Lift the handset.
2. Press the
Speed Call Controller
the Speed Call User
The screen displays
Make a call
Key.
Key if you make a
Key to leave
Cancel
Key if you make a
Key to leave
Cancel
Key to save the code
Key or
Key.
.
21