Call Page To Make An Announcement; Centrex/Exchange Switch Hook Flash - Nortel Meridian M3901 User Manual

Call Page to make an announcement

Call Page allows you to make an announcement over the paging system. To make
a page call, dial the paging trunk access code.
Note: When the Page Key is used on an attendant console it overrides the
telephones; the telephones are disconnected and must re-access the paging trunk.
To connect to the paging system:
To disconnect from the paging
system:
/
Goodbye

Centrex/Exchange Switch Hook Flash

Centrex/Exchange Switch Hook Flash allows you to signal the Central
Office/Exchange (CO) during an established call to use a Centrex service such as
call transfer or three-way calling.
To use Centrex/Exchange Line Switch
Hook Flash:
/
Goodbye
Additional Call Features
1. Lift the handset.
2. the paging trunk access code.
Dial
The connection to the paging system is
complete.
3. Make your announcement.
Press the Goodbye
1. Press the Centrex Switch Hook Flash
Key You receive special dial tone.
2. Dial the codes for your custom Centrex
feature.
3. Press the Goodbye
Note: The Meridian SL-100 is a central
office based PBX, and this feature is not
available.
.
Key
Key to end the call.
53