Nortel MCC 3100 Software Manual page 65

8. From the menu, select Call.
The Group-Call Session screen appears.
9. The enterprise telephony system calls you at the contact location you
specified.
10. Accept the call, and then follow the prompts. As the group call
initiator, you perform the following steps:
a. Record the conference greeting, and then press pound (#) on
your telephone dialpad.
b. Press 1 to review the greeting, press 2 to rerecord the greeting,
or press any other key to accept the greeting and start the
conference.
11. The enterprise telephony system calls the friends you selected at
their default contact locations. They are prompted to select one of the
following options on the MCC 3100.
— Join Now to join the group call immediately.
— Join Later to be prompted to join the group all at a later time. To
set your reminder notification interval, see
page 32.
— Decline to reject the group call.
Friends can also join a group call by pressing # on their telephone
dialpad. A tone is heard each time someone joins the group call.
Managing group calls
During a group call, the following commands manage group calls:
• press ** to hear help
• press *1 to end the conference
• press *3 to dial another friend, then press #
• press *5 to mute or unmute the conference
• press *6 to mute or unmute your own voice
• press *7 to lock or unlock the conference
• press *8 to hear a list of participants
Advanced functions
"Call settings" on
65