Installation Instructions; Step 1 - Unpack The Washer - Haier HLP21N Installation And User Manual

INSTALLATION INSTRUCTIONS

We recommend that your new washer be installed by a qualified appliance
technician. If you feel that you have the skills to install the washer, please read the
installation instructions carefully before installing.
IMPORTANT:
•
If, after completing these steps, you are unsure that the washer is properly
installed, contact a qualified appliance technician.
•
If your washer was just delivered and the outside temperature was below
freezing, do not operate until the washer warms up to room temperature.
STEP 1 – UNPACK THE WASHER
To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
Failure to follow these instructions can result in death or brain damage.
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Remove all packing materials. This includes the foam base, molded plastic
support and all adhesive tape holding the washer accessories inside and outside.
IMPORTANT: Failure to remove the packing base will cause the washer to not
operate properly and will void your warranty.
•
Open the lid to access the wash basket brace. Pull up on the basket brace to
remove.
NOTE: Save the wash basket brace to use when moving the washer in the
future.
WARNING
Suffocation Hazard
WARNING
Excessive Weight Hazard
11