Stretch Stitch Feed Balance - ELNA 6005 heirloom edition Service Manual

PDFMAILER.DE
21
When pattern "8" is sewn with the feed balancing dial at the standard setting mark,
figure D, the stitch pattern should be as shown below.
1. Turn on the power switch while pushing the reverse button, and then select the pattern
No. 8 within 2.5 seconds. "CHECK PATTERN (8) will appear in the screen.
2. Set the feed balancing dial D at the standard setting mark.
3. Sew the pattern "8" (The machine will stop automatically after sewing eight stitch pattern).
4. Remove the base (see page 10).
5. Adjust the stretch stitch feed balance by turning the adjusting screw
in the direction A or B.
6. Attach the base.

STRETCH STITCH FEED BALANCE

see