Feed Balance On Stretch Stitch - ELNA eXplore 240 Service Manual

MECHANICAL ADJUSTMENT

FEED BALANCE ON STRETCH STITCH

TO CHECK:
If the stretch stitch patterns are distorted when setting the stitch length dial at "S.S." (There is a
difference between forward feeding and backward feeding during stretch stitch patterns), adjust as
follows:
ADJUSTMENT PROCEDURE:
1. Remove the cap.
2. Set the pattern selector dial at (
3. Turn the stretch stitch adjusting screw in the direction of (C) when
A > B, or in the direction of (D) when A < B.
4. Attach the cap.
A 1
A 1
A 2 3 B
A
2
A B A
), and the stitch length dial at "S.S."
A
1
3 B
A
2
3 B
B A B
19
MODEL:eXplore 240
Cap
(C) (D)
Notch
Stretch stitch adjusting
screw