Installation Procedure On Sun System Ⅱ; Setting The Mo Drive; Rear Panel - Sony SMO-F551 Installation Manual

Installation Procedure on SUN System Ⅱ
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host:
OS:
Target:
Installation:

1) Setting the MO drive

- Set the SCSI host adapter into the host computer using proper SCSI cable.
- Set proper SCSI ID on the MO drive. (This example case ID is set 4)
- Set proper termination.
- Set the Device Type 0. (Enable auto configuration for format.)

Rear Panel

SMO-F551 / RMO-S551 Installation Guide
SUN ULTRA SPARC 30
Solaris 8, 9
SMO-F551
- Device type is set to 0
- 512 byte/sector media is used.
Functional Switch SCSI Connector
B1
2
A1
1 12
1
DC Power Connector
50 4 1
49
13