Sony SMO-F551 Installation Manual page 28

3) Edit "disktab" file
- Edit or add /etc/disktab file as following.
###############################################
# Sony Magneto-Optical Media
###############################################
SONY_MO_8X_2048:¥
:No swap or boot:ns#39:nt#16:nc#3997:¥
:s0#2494170:b0#8192:f0#2048:¥
:se#2048:rm#3300:
SONY_MO_8X_1024:¥
:No swap or boot:ns#39:nt#16:nc#3671:¥
:s0#2290750:b0#8192:f0#1024:¥
:se#1024:rm#3300:
SONY_MO_8X_512:¥
:No swap or boot:ns#39:nt#16:nc#3131:¥
:s0#1954200:b0#8192:f0#1024:¥
:se#512:rm#3300:
4) Format Media
- Format the media using following command. You must execute this command only one
time when you use the media first time.
# mediainit –v /dev/rdsk/c201d0s0 [Enter]
It takes about 45 minutes.
5) Create a file system
- Create a file system using following command.
# newfs /dev/rdsk/c201d1s0 Media_type [Enter]
Media type : Please input proper sentence (refer disktab, ex SONY_MO_8X_512)
6) Mount the media
- Mount the media using following commands.
# mkdir /mo [Enter]
# mount /dev/dsk/c201d1s0 /mo [Enter]
SMO-F551 / RMO-S551 Installation Guide
28