Approvals - Siemens SCALANCE XB-000 Operating Instructions Manual

Approvals

The SIMATIC NET products described in these Operating Instructions have the approvals
listed below.
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Note the installation guidelines
The devices meet the requirements if you keep to the installation instructions and safety-
related notices as described here and in the manual "SIMATIC NET Industrial Ethernet
Twisted Pair and Fiber Optic Networks
(http://support.automation.siemens.com/WW/view/en/8763736)" when installing and
operating the device.
Notes for the Manufacturers of Machines
The devices are not machines in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 2006/42/EC for these
devices.
If the devices are part of the equipment of a machine, they must be included in the
declaration of conformity procedure by the manufacturer of the machine.
EU declaration of conformity
You will find EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support
(http://support.automation.siemens.com/WW/view/en/33118389/134200).
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06
8
69