: Use a 7 mm (9/32") dia. drift to
carefully push home the new
valve until dimension 'a' is about
1 mm (3/64").
– Fit the oil filler cap.
56
10.4
Worm
a
– Remove the clutch – b 8.
: Remove the cover washer (1).
: Pull the worm and drive spring
(arrow) off the crankshaft stub.
: Take the drive spring off the
worm.
Reassemble in the reverse
sequence.
Fit the cover washer so that the
1
word "TOP" faces outwards.
MS 210, MS 230, MS 250