Front Chain Tensioner; Side Chain Tensioner - Stihl MS 210 Service Manual
Hide thumbs
Also See for MS 210:
- Instruction manual (152 pages) ,
- Instruction manual (146 pages) ,
- Instruction manual (20 pages)
Table of Contents
Advertisement
1
2
: Use the hook (2) 1117 890 0900
to attach the brake spring (1) to
the anchor pin.
3
2
– Fit the bushing (1) in the hand
guard (2).
: Insert M5x24 screw (3) and
tighten down to 3.5 Nm
(2.6 lbf.ft).
– Fit the cover.
– Tighten screws to 2.0 Nm
(1.5 lbf.ft).
– Fit upper bumper strip on
tensioner.
– Install clutch drum/chain sprocket
– b 5.1.
– Check operation of chain brake –
b 5.4.1.
22
5.5
Front Chain Tensioner
– Remove the chain sprocket
cover.
: Pull the cover out of the housing.
1
2
1
3
: Unscrew the nut (1) from the
adjusting screw (2).
: Take the adjusting screw out of
the cover (3).
Reverse the above sequence to
install the chain tensioner.
5.6
Side Chain Tensioner
– Remove the chain sprocket
cover.
: Take out the screw.
– Pull tensioner assembly out of
the engine housing.
1
4
2
3
: Take the thrust pad (1) off the
adjusting screw (2).
: Rotate the spur gear (3) until the
adjusting screw comes out of the
tensioner slide (4).
: Pull the spur gear out of the
cover.
MS 210, MS 230, MS 250
Hide quick links:
Advertisement
Table of Contents
