Cadillac XT5 2017 Owner's Manual page 61

60 SEATS AND RESTRAINTS
Manually Recalling Memory
Positions
Press and hold 1, 2, or
recall the previously stored memory
positions. Releasing 1, 2, or
the stored positions are reached stops
the recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
If programmed in vehicle
personalization, the Auto (Automatic)
Memory Recall feature automatically
recalls the current driver s previously
stored 1 or 2 position when the
ignition is changed from OFF to ON/
RUN or ACC/ACCESSORY.
See Auto Memory Recall under
Comfort and Convenience in Vehicle
Personalization 0 151.
To stop recall movement, press one of
the memory, power mirror, or power
seat controls; or press the power tilt
and telescoping steering column
control.
RKE transmitters are not labeled with
a number. If your memory seat
position is stored to 1 or 2 but this
position is not automatically recalling,
then store your positions to the other
button or switch RKE transmitters
to manually
with the other driver.
If the vehicle s driver has changed, in
before
some vehicles the Driver ID may be
displayed for the next few ignition
cycles.
Easy Exit Recall
If programmed on in the vehicle
personalization menu, the easy exit
feature automatically recalls the
previously stored exit positions when
leaving the vehicle. See Storing
Memory Positions earlier in this
section. See also Vehicle
Personalization 0 151.
Easy exit recall automatically activates
when one of the following occurs:
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.
Obstructions
If something has blocked the driver
seat while recalling a memory
position, the recall may stop. Remove
the obstruction. Then do one of the
following:
If automatically or manually
recalling the stored memory
position, press and hold the
appropriate manual control for
two seconds. Try recalling again by
pressing the appropriate memory
button. If automatically recalling
the position, try recalling again by
opening the driver door and
pressing on the RKE
transmitter.
If recalling the exit position, press
and hold the appropriate manual
control for the exit feature not
recalling for two seconds. Then try
recalling the exit position again.
If the memory position is still not
recalling, see your dealer for service.