Driver Mode Control - Cadillac XT5 2017 Owner's Manual

208 DRIVING AND OPERATING
turn TCS and StabiliTrak on again,
press and release . The Traction Off
light and StabiliTrak Off light
the instrument cluster turn off and the
appropriate DIC message is displayed.
Adding accessories can affect vehicle
performance. See Accessories and
Modifications 0 248.

DRIVER MODE CONTROL

If equipped, the Driver Mode Control
has the following modes: Tour, Sport,
All-Wheel Drive (AWD), and Snow/Ice
(Front-Wheel Drive vehicles only).
Press MODE on the center console to
make a mode selection. The first press
of the switch will show the current
mode in the instrument cluster.
Continue pressing through the
available modes.
If the vehicle is put in AWD Mode, it
will remain in AWD through future
ignition cycles, until a different mode
is selected.
If the vehicle is in Tour or Sport Mode
when the engine is turned off, Driver
Mode Control will come on in Tour
Mode at the next ignition cycle.
When AWD Mode or Sport Mode is
selected, the light will come on in the
AWD indicator below the MODE
in
switch. The indicator light will turn off
when Tour Mode is selected. For more
information on AWD Mode, see
All-Wheel Drive 0 202.
Driver Mode Control Switch
Tour : Tour Mode operates in FWD to
improve fuel economy. Use this mode
during normal driving operations.
Sport : Sport Mode improves vehicle
handling and acceleration on dry
pavement. When active, Sport Mode
modifies steering efforts, transmission
shifting, AWD torque, and suspension
tuning, if equipped.
AWD : AWD Mode provides drive
torque to all four wheels. Select AWD
to improve traction and control on
slippery road surfaces, such as gravel,
sand, wet pavement, snow, and ice.
When in AWD Mode, the AWD Mode
indicator light will be on. For more
information on AWD Mode, see
All-Wheel Drive 0 202.
Snow/Ice (FWD Vehicles Only) : Snow/
Ice Mode improves vehicle
acceleration on snow and ice covered
roads.