Midi Data Bulk Dump - GEM GM-X Owner's Manual

owners manual
This function transmits the user data contained in the PERFORMANCE to an external MIDI device, such as a PC or a
MIDI recorder to create an archive.
To transmit the data BULK to an external device the gm-x MIDI OUT has to be connected to the MIDI IN of the receiving
data recorder MIDI IN.
Enter the MEMORY MANAGEMENT SYSTEM mode keep-
ing pressed at least for 2 seconds the PERF and the EDIT
buttons at the same time. As already seen the fi rst menu
is the MIDI COMMON channel setting.
Both the pressed button and the PART (CH) LED will blink in
the instrument.
Pressing three time the EDIT button in the panel, in
this way the previous function are selected (MIDI ID,
RESET).
Once the BULK function is reached in the menu, the dis-
play show the fl ashing message "BUL", (BULK).
Press the DATA button to start the data transmission.
The data transmission in progress is visualized in the
display with a progressive number, from 0 to 100 (in
percentage).
The data transmission can be interrupted at any time, by pressing
the DATA button. In this case the message "ABT" (aborted)
appears in the display.
Once the data transmission it's completed the message
"EOT" (End of transmission) appears in the display.
At this point it's possible to start a new BULK data trans-
mission (useful in case of error), by simply pressing the
DATA button.
The process starts from the beginning again.
It is possible to exit from the BULK menu by pressing the
EDIT button in the panel.
Or it's also possible to exit the MEMORY MANAGEMENT
SYSTEM mode by pressing the PERF button.
The LED on the display stop blinking and the instrument
return to the default GM2 mode.
Page 14

MIDI DATA BULK DUMP

gm-x
1
2
3
Ecc.