Edit The Performance; Memorize The Performance; Store The Edit In The Same Performance Location; Store The Edit In A Different Performance Location - GEM GM-X Owner's Manual

owners manual
The method to edit the PERFORMANCE is the same process already explained for the GM2 default mode. The
PERFORMANCE mode possesses a very important feature, it's possible to store (and recall), in the instrument
memory 99 different settings, which are retained in the modules memory after turning off the instrument.
To enter the PERF edit mode press the EDIT button
on the panel
The PART (CH) parameter is automatically selected, mean-
while its current value it's visualized in the display
Modifying any parameters value, the PERF LED on
the panel will start blinking, visualizing the edit
status.
The available parameters in PERFORMANCE mode are the same already explained in the GM2 mode. Please refer to the pages 6-8 of this
manual, for the complete editing procedure.
The parameter set directly available from the panel of the gm-x module, both in GM2 or PERF mode is a reduced set than available in the
instrument, (this is due to the simplifi ed navigation system used in the module). The best way to fully edit the gm-x performance is to use the
PC EDITOR software included in the package. This software allows you to easily create or edit all kinds of performances!
Once your PERFORMANCE edit it's complete, press
1
the blinking PERF button on the display.
At this point both the PERF button and the digit
2
"P01" in the display (indicating the number of the
edited performance in this example), blink at the
same time.
Keep the PERF button pressed for at least for 2 sec-
3
onds to store in the current location. The display show
the blinking message "STR" (STORE).
Once the procedure is complete the "STR" display mes-
4
sage will stop blinking. Releasing the PERF button the
number of the current PERFORMANCE is showed again
in the display, to confi rm the STORE operation.

STORE THE EDIT IN A DIFFERENT PERFORMANCE LOCATION

STORE THE EDIT IN A DIFFERENT PERFORMANCE LOCATION
Once your PERFORMANCE edit it's complete, press
1
the blinking PERF button on the display.
At this point both the PERF button and the digit
2
"P01" in the display (indicating the number of the
edited performance in this example), blink at the
same time.
It's now possible to select another PERF location using
3
the DATA buttons. It's possible to select any of
the 99 available memory locations.
Once the desired memory location is reached, keep
4
pressed the PERF button at least for 2 seconds to store
data. The display show the message "STR" (STORE).
Once the procedure is complete the "STR" display message
will stop blinking. Releasing the PERF button the number of
the current PERFORMANCE is showed again in the display,
to confi rm the STORE operation.
Page 10

EDIT THE PERFORMANCE

MEMORIZE THE PERFORMANCE

STORE THE EDIT IN THE SAME PERFORMANCE LOCATION

STORE THE EDIT IN THE SAME PERFORMANCE LOCATION
NOTES
gm-x