System Reset - GEM GM-X Owner's Manual

gm-x
owners manual

SYSTEM RESET

This function restores the original programmed factory set up of the entire instrument.
Enter the MEMORY MANAGEMENT SYSTEM mode keep-
ing pressed al least for 2 seconds the PERF and the EDIT
buttons at the same time. As already seen the fi rst menu
is the MIDI COMMON channel setting.
Both the pressed button and the PART (CH) LED will blink in
the instrument.
Press the EDIT buttons again and the MIDI ID menu is
selected.
Press the EDIT button again, the display show the fl ash-
ing message "RST", RESET. The RESET menu it's now
selected.
Keep the DATA button pressed (at least 2 sec.) to reset
the instrument. In this way the factory data set up is fully
restored.
The LED and the display stop blinking and the instrument
select the default GM2 mode.
Page 13