Before You Begin - Razor Spark Owner's Manual

Before you Begin

Remove contents from box. Remove the packing material used to protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint and dents that may have occurred during shipping.
Because your scooter is assembled and packed at the factory, there should not be any problems, even if the box has a
few scars or dents.
Grip
T-Bar
Quick-Release Lever
Extension Tube
Fork
required
2mm/5mm Allen wrenches
(Not Included)
Need Help? Contact our Customer Service Team at 1 800 244 543 or email us at info@funtastic.com.au
Handlebars
Folding Mechanism/
Joint Release Lever
Phillips Head Screwdriver
(Not Included)
2
Spark Bar
Spark Cartridge
Brake
LED Lights for Spark 2.0 (not shown)
Battery Compartment (Spark 2.0 only)
(2) CR2032H
Lithium batteries
(Included)
Warning: DO NOT
USE NON-RAZOR PARTS
WITH YOUR SCOOTER.
Razor scooters have been
built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the
basis of its compatibility with
the frame, fork and all other
parts. Certain aftermarket parts
may not be compatible and will
void your warranty.
PRODUCT I.D. CODE
1. Underneath the Deck
2. UPC Side of Box (not shown)