Advertisement
HEADLINE
BEFORE YOU BEGIN
Remove contents from box and check parts against part diagram below. Remove the separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked
cables that may have occurred during shipping. Because the PowerWing Lightshow is partially assembled and
packed at the factory, there should not be any problems even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly. Razor recommends assembly by an adult.
Collar Clamp
Light-Up Front Wheel
Required Tools
Two (2) 5 mm Allen Wrenches
(Included)
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Brake Lever
Handlebar Stem
Light Mode Button
1.
Right Platform
Frame
Rear Caster
Light-Up Rear Wheel
2 2
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR POWERWING LIGHTSHOW.
The PowerWing Lightshow has
been built to certain Razor design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame,
fork and all other parts. Certain
aftermarket products may not be
compatible and will void
the warranty.
Product ID Locations:
(See locations to the left)
1. Side of frame
2. Barcode on side of box
(not shown)
Left Platform
Box Contents:
• PowerWing Lightshow
• Allen Wrenches
• Owner's Manual
Advertisement
