Razor Spark Owner's Manual page 5

aSSeMBLy anD SetuP
q Battery (Spark 2.0 only)
q replacing the Battery (Spark 2.0 only)
Tools required: Phillips head screwdriver, (2) CR2032H Lithium batteries
1
Using a Phillips head
screwdriver, loosen the screw
on the battery compartment
and remove cover.
Need Help? Contact our Customer Service Team at 1 800 244 543 or email us at info@funtastic.com.au
1
To activate the battery, locate the battery under
the front of the deck and pull the plastic sheet out
from under the battery cover.
2
Discard old batteries and
replace with (2) CR2032H Lithium
batteries. Note: Make sure to
install BOTH batteries positive (+)
side up.
3
Replace cover and secure
with screw
4
Warning:
• Lithium batteries included
for lights - adult attention for
changing and disposal.
• Battery should only be replaced
by an adult.
• Loose battery could present a
choking hazard and should be
kept away from small children.
• Dispose of battery properly.