Table of Contents
Advertisement
Lift the panel into the deflector plate
and hook it in at the back.
Tilt the panel upwards at the front
and press it into the locking clip.
Cleaning and care
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
Whilst the fan is switched on, press
the operating hours control for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filter(s)
before the operating hours counter has
reached its maximum,
Press the operating hours control
for approx. 6 seconds, until only
the 1 is flashing.
31
Advertisement
Table of Contents
